Repairing Lopsided One-Side Windows Headphone Sounds

Repairing Lopsided One-Side Windows Headphone Sounds

Joseph Lv12

Repairing Lopsided One-Side Windows Headphone Sounds

Have you stopped hearing any sound from one side of your headphones? In most cases, this is due to a hardware issue where one side of your headphones is broken before the other. However, other factors can also cause one side of your headphones to become unresponsive, including some Windows settings.

Here’re a few checks and fixes to find out if the issue is hardware-related or caused by misconfigured settings and resolve it.

1. Perform Some Preliminary Checks

Before you begin troubleshooting the issue, perform the following checks first, as they may resolve the problem right away:

  1. Restart your computer.
  2. Make sure the headphones are properly plugged into your PC.
  3. Unplug your headphones from your device and plug them back in again.
  4. If you have more than one set of headphones connected to your device, unplug all except the one you want to use.

If the above checks don’t work, start applying the remaining fixes.

2. Check for Hardware Issues

A person wearing headphones next to a microphone and PC screen

First and foremost, you should ensure it’s not a hardware issue that has muted one side of your headphone. The easiest way to check this is to plug the headphones into any other device you own and see whether you hear anything from the problematic side.

If you fail to hear anything when connecting the headphones to another device, the problem is likely hardware-related. In that case, either have your headphones inspected by a technician or watch YouTube videos to learn how to fix headphones yourself .

In contrast, if you hear audio as usual when connecting your headphones to another device, it’s a device-specific issue.

3. Check the Audio Jack or Port for Issues

An RCA jack with a broken pin inside

TubeDigger - online video downloader from mostly any site

Some PCs still come with separate jacks for microphones and headphones. Each jack supports a similar-looking connector, but the signal flow is different.

While your headphones might work if plugged incorrectly, you could encounter annoying issues. Therefore, make sure you have plugged the headphones into the correct jack.

If you have a USB headset, consider plugging it into a different USB port than it is currently plugged into. This will rule out any hardware issues with the USB port. If you use Bluetooth headphones, remove any objects in front of your device that could interfere with their signal transmission.

Audio jacks often get clogged with dust and dirt, which can block signal transmission. Therefore, make sure that the jacks are clean.

4. Ensure One Side of Your Headphones Isn’t Muted

The sound balance feature in Windows makes it possible to control the audio intensity from both the left and right sides of headphones. If the sound isn’t coming from one side, that side could be muted in the settings. Therefore, you should make sure that isn’t the case.

To check that, follow these steps:

  1. Go to the Windows Settings app.
  2. Go to the System tab on the left and navigate to Sound.
  3. Under Advanced, click More sound settings.
    Open More Sound Settings in the Sound Settings of the Windows Settings App
  4. Navigate to the Playback tab, right-click your headphones device, then select Properties.
    Open Properties by Right-clicking on Your Device in the Playback Tab
  5. Navigate to the Levels tab of the properties window.
  6. Click on the Balance button.
    Click the Balance Button in the Levels Tab of the Properties Window
  7. Make sure neither the left nor right side is muted. If both sides are at different levels at the moment, balance them.
    Balance the Sound Levels of Both the Right and Left Side of Your Headphone

Hopefully you can now hear from both sides of your headphones.

5. Disable Audio Enhancements

The audio enhancement feature makes the output of audio as clean as possible. By adding additional processing, this feature can create a significant improvement in the quality of your audio.

However, it is also known to cause problems with your audio. Therefore, if you keep the audio enhancements feature enabled on your PC, disable it and see if it fixes the issue.

Here’s how:

  1. Just like before, go to Sound settings, then navigate to Playback.
  2. Right-click on your headphones device and select Properties.
  3. Go to the Advanced tab and uncheck the box beside Enable audio enhancements.
    Disable Audio Enhancements in the Advanced Tab of the Properties Window

Now give your headphones another try.

## 6\. Disable Mono Audio

The mono audio format combines the left and right audio channels into one and removes the stereo effect. Enabling this feature will give you the same audio quality on both sides of your headphones.

Most often, it’s helpful when only one side of your headphones works, and you don’t want to compromise audio quality. Despite being useful, enabling this feature can lead to audio issues. So, if you’ve enabled it on your device, disabling it may resolve the issue.

To do that, follow these steps:

  1. Open Settings.
  2. Navigate to the Accessibility tab in the left sidebar.
  3. Under Hearing, click on Audio.
    Open Audio Settings in the Accessibility Tab of the Windows Settings App
  4. Turn off the toggle next to Mono audio if it’s already selected. Take advantage of PREMIUM features for 12 months.
    Create your texts / logos without any limitation.
    No attribution required when downloading.
    No advertising on the website.
    TextStudio.com PREMIUM - Yearly Membership
    Disable Mono Audio in Audio Settings of the Windows Settings App

If this doesn’t fix the issue, remember to turn the mono audio setting off again before continuing.

7. Check for App-Specific Issues

If you don’t hear any voice from one side of your headphones only when running a particular app, chances are that app offers a setting to control the output from each side of your headphones Therefore, check the audio settings and ensure both sides are unmuted, and the volume levels are balanced.

Likewise, third-party audio enhancement apps can sometimes interfere with the audio output, blocking sound from one side of your headset. If you use such an app, try temporarily turning it off. If turning off the app solves the problem, delete the app permanently and find an alternative that does not cause the problem.

Video Converter Factory Pro

8. Perform Some Windows Fixes

If you fail to get one side of your headset up and running after performing the fixes above, here are some Windows fixes that might help:

Get Your Headphones Working Again

Hearing from one side of your headphones completely ruins our experience. Hopefully, you now better understand why one side of your headphones goes mute and how you can fix it so you can hear from both sides.

Here’re a few checks and fixes to find out if the issue is hardware-related or caused by misconfigured settings and resolve it.

  • Title: Repairing Lopsided One-Side Windows Headphone Sounds
  • Author: Joseph
  • Created at : 2024-08-22 21:36:49
  • Updated at : 2024-08-23 21:36:49
  • Link: https://windows11.techidaily.com/repairing-lopsided-one-side-windows-headphone-sounds/
  • License: This work is licensed under CC BY-NC-SA 4.0.